Measure in 5/64" from the bass side edge of the fretboard, and lay out the first course of strings (.862" spread). APPLICATION: With and 4 right, 4 tuning a. DIMENSIONS: 24mm peg spacing for 8 string mandolin. With proportional spacing, the "G" strings at the bass side are 7/64" apart. EASY TO INSTALL: Easy to install, no additional tools required. 862" spread (use your calipers to locate these spreads on your string spacing rule). He locates the inner E 5/64" from the outer, and his second course of strings has an. Mark the loca- tion of the notches with a pencil using the recommended spacing indicated at the top of Drawing 16. Starting from the outside E string, he gives the first course of strings an. Make sure you are using the correct side of the jig for the spacing you want. It is customary to have the group of three holes placed in the middle of the slot.
In this case you will need to either have the slots cut or have them laid out on the peghead. 940" overall spacing of the outside strings, centered on the nut. The guitar Tuner Peghead Drill Jigs can also be used for slotted pegheads. To avoid this, here are the measurements Don MacRostie uses for nut slots on Red Diamond mandolins:ĭon's mando necks are 1.100" at the nut and he uses. If two wound strings are too close, they can vibrate against one another. We'll refer to these as two “courses” of strings: one bass-to-treble course is paired by a second bass-to-treble course beside it.īecause these courses are very close together, spacing Is especially critical on mandolins. The answer is, absolutely!īoth 12-strings and mandos use paired strings. This is especially important in mandolins where bridges are free-floating and therefore have a tendency to move. the mandolin to sound in tune when you play higher on the fretboard, up to the 12th fret or even higher. View All WOODSTAX - Shop Tonewood by the PieceĬustomers call me on our tech support line to ask whether they can use the string spacing rule for 12-string and mandolin nuts. Mandolin setup is all about positioning the bridge in the proper place to achieve intonation, i.e.View All All Hardware + Parts by Instrument.
0 kommentar(er)
